Fluke                                                       MET/CAL Procedure
=============================================================================
INSTRUMENT:            Beckman DM10XL: (1 year) CAL VER /5500
DATE:                  27-Aug-97
AUTHOR:                Fluke Corporation
REVISION:              $Revision: 1.5 $
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       21
NUMBER OF LINES:       107
CONFIGURATION:         Fluke 5500A
=============================================================================
#
# Compatibility:
#   5500/CAL 4.0 or MET/CAL 4.0 or later.
#
# Subprocedures:
#   None
#
# Required Files:
#   dm10xlv.bmp
#   dm10xllc.bmp
#   dm10xlhc.bmp
#
# System Specifications:
#   TUR calculation is based on specification interval of the accuracy file.
#   The default 5500A accuracy file contains 90 day specs.
#
# Fluke makes no warranty, expressed or implied, as to the fitness
# or suitability of this procedure in the customer's application.
#
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-                        P                            F        V
  1.002  ASK+           K                              X
  1.003  HEAD         PRELIMINARY INSTRUCTIONS
  1.004  DISP         Warm-up time: None
  1.004  DISP         Temperature: 0 - 50degC
  1.004  DISP         Humidity: <70%
  1.005  DISP         [32]                WARNING
  1.005  DISP         HIGH VOLTAGE is used or exposed during the performance
  1.005  DISP         of this calibration.  DEATH ON CONTACT may result if
  1.005  DISP         personnel fail to observe safety precautions.
  1.006  PIC          dm10xlv
  1.007  HEAD         {AC VOLTAGE}
  1.008  HEAD         AC VOLTAGE: {200V Range}
  1.009  5500   200   190.0V         1% 0.4U       60H            SI       2W
  2.001  HEAD         AC VOLTAGE: {750V Range}
  2.002  5500   750   700V           1.5% 4U       60H            SI       2W
  3.001  HEAD         {DC VOLTAGE}
  3.002  HEAD         DC VOLTAGE: {1000V Range}
  3.003  5500   1000  1000V          0.7% 1U                               2W
  4.001  HEAD         DC VOLTAGE: {200V Range}
  4.002  5500   200   190.0V         0.7% 0.05/                            2W
  5.001  HEAD         DC VOLTAGE: {20V Range}
  5.002  5500   20    19.00V         0.7% 0.05/                            2W
  6.001  HEAD         DC VOLTAGE: {2V Range}
  6.002  5500   2     1.900V         0.7% 0.05/                            2W
  7.001  HEAD         DC VOLTAGE: {200mV Range}
  7.002  5500   200   190.0mV        0.7% 0.05/                            2W
  8.001  HEAD         {RESISTANCE}
  8.002  HEAD         RESISTANCE: {20 MOhm Range}
  8.003  5500   20    19.00MZ        3% 0.01U                              2W
  9.001  HEAD         RESISTANCE: {2 MOhm Range}
  9.002  5500   2     1.900MZ        1% 0.001U                             2W
 10.001  HEAD         RESISTANCE: {200 kOhm Range}
 10.002  5500   200   190.0kZ        1% 0.1U                               2W
 11.001  HEAD         RESISTANCE: {20 kOhm Range}
 11.002  DISP         Connect the 5500A to the UUT as follows:
 11.002  DISP         [32] 5500A AUX HI to UUT V/OHM
 11.002  DISP         [32] 5500A AUX LO to UUT COM
 11.002  DISP         [32] 5500A NORMAL HI to UUT V/OHM
 11.002  DISP         [32] 5500A NORMAL LO to UUT COM
 11.002  DISP         Connect the SENSE leads DIRECTLY to the UUT.  Connect
 11.002  DISP         the NORMAL leads to the SENSE leads AT the UUT.
 11.003  5500   20    19.00kZ        1% 0.01U                              CW
 12.001  HEAD         RESISTANCE: {2 kOhm Range}
 12.002  5500   2     1.900kZ        1% 0.001U                             CW
 13.001  HEAD         RESISTANCE: {200 Ohm Range}
 13.002  5500   200   190.0Z         1% 0.3U                               CW
 14.001  HEAD         {DIODE TESTER}
 14.002  PIC          dm10xlv
 14.003  DISP         Set the DMM FUNCTION/RANGE switch to DIODE.
 14.004  5500         0.5V                                              S  2W
 14.005  EVAL   Does {the display read approx. 0.500 (diode junction)}?
 15.001  HEAD         {DC CURRENT}
 15.002  PIC          dm10xllc
 15.003  HEAD         DC CURRENT: {200uA Range}
 15.004  5500   200   190.0uA        1% 0.1U                               2W
 16.001  HEAD         DC CURRENT: {2mA Range}
 16.002  5500   2     1.900mA        1% 0.1U                               2W
 17.001  HEAD         DC CURRENT: {20mA Range}
 17.002  5500   20    19.00mA        1% 0.1U                               2W
 18.001  HEAD         DC CURRENT: {200mA Range}
 18.002  5500   200   190.0mA        1% 0.1U                               2W
 19.001  PIC          dm10xlhc
 19.002  HEAD         DC CURRENT: {10A Range}
 19.003  5500   10    9.90A          2% 0.03U                              2W
 20.001  HEAD         {SAFETY TESTER}
 20.002  DISP         Set the DMM FUNCTION/RANGE switch to SAFETY TESTER.
 20.002  DISP
 20.002  DISP         *NOTE* this function does not operate off the internal
 20.002  DISP         [32]      DMM battery, instead it is powered from the
 20.002  DISP         [32]      voltage source being measured. The LCD display
 20.002  DISP         [32]      will be BLANK.
 20.003  PIC          dm10xlv
 20.004  5500         25V                                               S  2W
 20.005  EVAL   Do {the LEDs indicate a voltage between 24 - 50}?
 21.001  END